Yogapipe Lineset Pipe

All Products
>
Yogapipe Lineset Pipe

Yogapipe Lineset Pipe

A More Efficient Way to Install Linesets

Yogapipe is a flexible line set that offers a faster, more efficient way to install air conditioning line-sets when compared to than copper pipe. With up to Up to 200 feet of joint-free line set connection capabilities, the installer can make adjustments to bends without damaging the pipe. Pre-braze the fittings to equipment anywhere, anytime. With only a crimp operation left to do on-site, you can eliminate the need for hot work permits. Yogapipe doesn’t kink or harden like copper, eliminating dented, damaged and oxidized inventory. The pipe is also completely customizable in length so the installer can determine the length required. The flexible pipe can be pulled through walls, ceilings and bulkheads in one continuous length, perfect for those difficult installation applications. Yogapipe is compliant with the International Mechanical Code, International Residential Code, Uniform Mechanical Code, California Mechanical Code, and Florida Mechanical Code. ICC approval PMG-1409.

For More Information

Features & Benefits

Provides flexibility not capable with copper tubing
Available in sizes from 1/4" up to 1 1/8" in lengths of 50 ft. and 200 ft.
Option of pre-installed foam insulation
Easy to route, store, carry and bend
Less kinking meaning less rework
Reduced brazing and joints reduces chance of leakage
Reduced wastage to due to scrap and damaged inventory

Reduced copper content which reduces theft
Reduced transmission of vibration which decreases noise and potential connection failures
Designed to withstand the temp and pressure extremes associated with A/C
increased insulating effect compared to copper
Eliminates refrigerant leakage
Code compliant*

See How Yogapipe Lineset Pipe Works

Call YogaPipe at (410) 365-7049 or Fill Out Form for More Info

Click to upload Footer Background below

Flex Inject Sealant and UV Dye

Easily Injected into System - No Tools Required

DiversiTech has expanded its patent pending flexible hose offering with Flex Inject Sealant Total with UV dye (part #995) and Flash Detect Inject UV dye (part #990). The Total has all the great benefits of Flex Inject Sealant Advanced (part #985) providing 3X more sealing power than comparable injection systems without the need for any tools or manifold gauges. Flex Inject Sealant Total is compatible with all oils and refrigerants, is polymer free and now includes UV dye. The Flex Inject Sealant Total fixes leaks up to 300 microns and also exposes stress and hairline cracks before they turn into major issues, limiting the risk of a return service call. The Flash Detect Inject UV dye focuses strictly on finding leaks and potential system shutdown cracks. For both products, no UV glasses are required and DiversiTech recommends its 89DC UV illuminating light for the dye in both products.

More Info

Bi-Polar 2400

We provide value to your customers and profit for your business.

The Bi-Polar® 2400 whole home, filterless air purifier is a small unit -- about the size of a mobile phone. HVAC techs can quickly install this device in almost any A/C unit in minutes while on service/maintenance calls. The unit is a straightforward upsell to offer customers interested in an environmentally friendly way to get relief from poor indoor air quality. The Bi-Polar 2400 reduces allergens, mold, bacteria, viruses, odors and VOCs. Its cold plasma technology replaces the contaminants with healthy, breathable air without the use of UV bulbs or ozone. It works by using bi-polar ionization, splitting water vapor into harmless positive and negative ions that are discharged into the air. These ions attach themselves to allergens such as VOCs, fine particulates, smoke, dust, pollen, dander and more. In addition to deactivating contaminants at the cellular level, particles continue to bond to each other until they are heavy enough to drop out of the air and collect in filters.

More Info

ESP Zone Control Panel

Never Install Another Bypass Damper Again

The iO ZP3-HCMS forced air zoning panel is equipped with electronic static pressure (ESP) control technology, eliminating the need to install a conventional bypass damper. The contractor friendly ESP Panel is designed to fit up to three-zone applications for single-stage and multi-stage heat/cool systems in residential and light commercial applications. As the zone dampers open and close, the static pressure sensor continuously monitors the system static pressure. If the static pressure goes above the static pressure setpoint, the panel will open the non-calling zones just enough to relieve the excess pressure and bring the system below the desired setpoint. Without the need to install a bypass damper, HVAC contractors will benefit from significant savings in time, material and labor costs.

Request More Info and Receive 10% Off (offer good through 8/31/19)

More Info

Yogapipe Lineset Pipe

A More Efficient Way to Install Linesets

More Info

ICOR NU-22B Refrigerant

See How NU-22B Compares to R-22.

ICOR's NU-22B is an ozone safe replacement that closely matches the operating characteristics of R-22 at a lesser cost. No product-specific tools or supplies are needed to use NU-22B. It’s compatible with all standard oils and all standard equipment components and materials used in R-22 systems with no complications or expensive retrofits. NU-22B is in use in thousands of installations throughout the world and is a high-performance choice for both OEM and service replacement uses and can be used safely and responsibly with complete confidence. See how NU-22B compares to R-22 below.

More Info

FF 100 Film Tape for Reflective Insulation

A Film Tape Designed Specifically for Seaming and Sealing Reflective Insulation Shurtape's FF 100 All-Weather Film Tape is designed specifically for permanently seaming and sealing reflective insulation to create a permanent and airtight seal that is free of leaks. FF 100 features an aggressive, all-weather adhesive and flexible film backing that allows it to adhere to the bumpy surface of reflective insulation and seal the insulation for the life of the system. The hand-tearable tape easily withstands thermal cycles and delivers high performance in temperatures ranging from -14° F to 176° F, providing full system closure. And, because FF 100 is designed specifically for reflective insulation, it works just as well when the insulation is installed as a radiant barrier inside an attic, crawlspace, side wall or other area inside a homeor building. Fill out the form to request a FREE Role of FF 100 All-Weather Film Tape.

More Info

C450RF Easy Zone Control

RF Wireless Design Eliminates the Need to Install Cables Between the Thermostat and Air Grill

ALAN Manufacturing's new C450RF Easy Zone Control System opens and closes the Floor/Wall Air Grill by using radio frequency (RF) communication method. The system is ideal for hard to reach locations (such as under a vanity), for those who experience physical challenges or anyone that would like to be able to easily control air flow from their registers. The wireless design eliminates the need to install cables between the thermostat and the Air Grill, saving installers valuable time on the job site. The C450RF controls the Air Grill motor and is operated by the thermostat that sends commands. The system is composed of a Control board with Radio Frequency Receiver, the RF Pro Thermostat on the wall, Motor assembly, and Power supply adapter. The C450RF Easy Zone Control System is sold direct to HVAC contractors by Alan Manufacturing.

More Info

EasySeal Direct Inject-UV

Permanently Seals Small Refrigerant Leaks & UV Dye Locates Larger Refrigerant Leaks

EasySeal® Direct Inject-UV is a new generation of refrigerant leak sealant with an injection method that makes it easy to install. With this new injection system, there is no need to pump down systems with high pressure refrigerants such as R-410A. The sealantreacts with moisture and air that are naturally present at a leak to permanently seal the leak. The UV dye shows where larger leaks are with the use of a UV light. When injected, EasySeal travels with the refrigerant, searching for and sealing the smallest of leaks in condensers, evaporators, copper lines and soldered joints. It reacts with moisture and air that are naturally present at a leak, forming a permanent seal. Technicians can quickly inject EasySeal Direct Inject-UVinto the system and be confident the leak has been located and fixed without worrying about call backs.

More Info

A/C Re-New

Revitalizes Older HVAC Systems & Prevents Call-Backs from Sticking TEVs on New Installs

A/C Re-New® revitalizes older HVAC systems and helps prevent call-backs from sticking TEVs on new installations. The lubricant blends with the system's oil and lasts for the life of the equipment's oil charge. A/C Re-New helps the entire system work more efficiently, resulting in better system performance, cleaner systems, reduced stress on start-up, less wear/tear and lower energy costs. The lubricant also decreases friction within the compressor, silencing loud noises and reducing additional wear-and-tear on the system. Whether installing in a new unit or in an older unit, A/C Re-New is a great up-sell item to help boost profits while helping to prolong the life of your customers' HVAC systems. Fill out the form on this page for more info on how to become an authorized A/C Re-New installer.

More Info

AC Smart Seal Quick Shot

Quickly Locate and Repair Refrigerant Leaks Without the Need to Pump Down the System

The AC SMARTSEAL Quickshot Easy Inject Kit helps HVAC technicians to quickly locate and repair refrigerant leaks of all types and sizes without the need to pump down the system. AC SMARTSEAL is the first 3-in-1 sealant on the market with UV dye, sealant and Cool Enhancer that helps extend system life. The OEM approved formula is polymer free and is 100% green, non-toxic, non-flammable and safe to the touch. The kit includes a reusable injection hose that allows technicians to inject AC SMARTSEAL into the system while it is running at normal operating pressures, saving time and energy. The concentrated formula is fully compatible with all refrigerants and permanently seals small pinhole leaks as well as larger leaks with the least amount of sealant.

More Info

Zone One Kit

Solves Isolated Over-Heating or Over-Cooling Problems in Office Buildings

Zone One is a modulating or two position zone control system that solves isolated over-heating or over-cooling problems* in office buildings. The damper or diffuser can be used to control a single room or multiple rooms by using a number of dampers and diffusers. Simply run two wires to the 24 volt transformer and three wires to the thermostat and the problem is solved. Zone One uses pressure independent dampers or diffusers combined with individual space thermostats to manage occupant comfort based on individual setpoint preferences. When the Zone One thermostat calls for conditioning of the space, the duct sensor in the damper assembly senses warm or cold air in the duct supply. The thermostat then signals the damper to open or close, depending on the heating/cooling needs.

More Info

Aeroseal New Construction

Meet Tight Building Dodes by Sealing Ducts in Less Time than Tape or Mastic

Tighter building codes are causing headaches and costly delays for many builders and HVAC contractors using traditional duct sealing methods. The award-winning Aeroseal duct-sealing technology helps to solve that problem by allowing contractors to effectively seal ducts in less time and with fewer man-hours than traditional tape and mastic. Furthermore, the more profitable Aeroseal technology provides a verifiable seal certificate, eliminating guesswork and callbacks.Aeroseal's patented duct sealing process seals duct leaks from the inside out keeping dust, mold and pollutants from being pulled into living areas. It’s faster, more efficient, and 33% more profitable than hand sealing. Aeroseal can reduce duct leakage by up to 90%, reduce energy use by up to 30% and can dramatically improve indoor comfort.

More Info

Featured HVAC Products | About | Contact

Smart HVAC Products introduces new HVAC products and Innovative HVAC products to over 100,000 HVAC professionals nationwide.

We do not sell any of the products that we feature.
Product descriptions are provided by the manufacturer.

Does your company have a new or innovative product or service that you'd like to introduce to over 100,000 HVAC professionals? Please call us at 267-388-9347 or fill out the form on the Contact page.